Hybrid Relay 1-fold HR-K1

Hybrid Relay for reducing inrush currents at high current peaks. The module operates according to the zero voltage circuit principle.

Quick Facts

  • 1 control input for coil
  • 1 switching output with load in rated current of 16A (inductive max. 10A)
  • zero voltage switching technology

Hybrid Relay for reducing very high inrush currents, especially with ECGs. This is made possible by the combination of relay and zero voltage switching technology.
The relay is suitable for switching resistive, inductive and capacitive loads and is designed for a thermal current of 16A.

Electrical Data

Operating voltage 220V-240V AC 50/60Hz
Power consumption typical 0.48W
Switching output 1 x 250V AC, 16A
Mechanical life > 3 x 10.000.000 switching cycles
Connection screw terminals 2.5mm² solid or 1.5mm² with wire end ferrule
Max. ambient temperature -20°C to +55°C
Storage temperature -30°C to +70°C
Humidity max. 90% r. h. non-condensing
Protection class IP20
Pollution degree 2
Test voltage coil/contact 4 kV

Design, Dimensions, Weight

Design DIN rail-mounting plastic housing light grey, snap-on on 35mm DIN rail 1 HP
Dimensions WxHxD 17.5x90x58mm
Weight 70g

Ordering Data and Conformity

Type designation HR-K1
Article no. DD0054593
Make ISYnet
Conformity CE

Pin Assignment

2-pole connector

A1 Control 220-240V AC
A2 Control 220-240V AC

2-pole connector

11 Switching output 250V
12 Switching output 250V

Request

HR-K1

Article no.: DD0054593

+ shipping costs
  • kostenlose Anfrage / free request
    from 1 € 0.00 Incl. 0.00% VAT