DA-03D-OUT3-230V
Article no.: 80027134
-
kostenlose Anfrage / free request
from 1 € 0.00 € 0.00
The DA-03D-OUT3-230V Module is designed for the control of dimmed fluorescent lamps with ECG 1-10V. There are 3 analog outputs 1-10V available, each of which can be loaded with 40mA. Each analog output has a relay switching output with a load capacity of 230V 1500VA. These relay outputs are designed with a triac pre-ignition for the high inrush currents of the ECGs and are automatically activated depending on the analog values.
The following functions can be performed independently by the DA module:
Operating voltage | 230V 50/60Hz |
Operating voltage BUS | 12V to 35V DC |
Current consumption BUS | 10mA (24V) |
Output voltage | 3 analog channels, 8 bit (internal 12 bit) resolution 1-10V |
Sink current (1-10V) | 40mA per channel |
Relay output | 3 outputs 230V 1500VA (max. 6.5A) with triac zero voltage switch |
Isolation voltage | 500V (subnet / analog outputs) |
Connection | pluggable screw terminals |
Operating temperature | -10...+50°C |
Storage temperature | -25...+70°C |
Protection class | in non-installed state IP30 |
10-pole DIP switch for setting the ISYGLT BUS address (0-127) or DMX address is located at the top right of the module's terminals.
DIP-1 | Setting |
---|---|
OFF | ISYGLT operation: DIP4-10 ISYGLT address |
ON | DMX operation: DIP2-10 DMX address |
LED | Designation | State | Meaning |
---|---|---|---|
red | Power | Off | No operating voltage |
On | Operating voltage, no error | ||
yellow | BUS | Off | No BUS and timeout waiting time expired |
On | No BUS, but timeout waiting time has not yet expired | ||
blinking | Interference-free data transmission via the BUS line | ||
green | Regeln | blinking | Signals the regulation of the outputs (LED blinks until the desired final value is reached) |
green | Notbetrieb | Off | Emergency operation inactive |
On | Emergency operation active |
In the ISYGLT ProgramDesigner there are various parameterisation possibilities:
E | Emergency operating input (connection E-C) |
C | Emergency operating input (connection E-C) |
A | Subnet (BUS A, RS-485) |
B | Subnet (BUS B, RS-485) |
Article no.: 80027134