varintens Multifunctional Control Unit MDK-ES-10

The MDK-ES-10 is a digital Multifunctional Control Unit, which on the one hand can be controlled by different types and on the other hand can be used to control different loads.

Quick Facts

  • multifunctional control unit
  • 230V switching output
  • 0-10V and 1-10V analog output
  • various control types
  • robust
  • easy handling

The MDK-ES-10 is a digital Multifunctional Control Unit which can be controlled by different types:

  • control via a potentiometer
  • control via a single button
  • control via several buttons
  • control with switching dimming actuator

It also has a 230V switching output as well as a 0-10V and 1-10V analog output, allowing additional standard dimmers or dimmable electronic ballasts (ECG) to be controlled.

    Electrical Data

    Mains voltage 230 V ±10%
    Mains frequency 50 Hz (option 60 Hz)
    Technology switching output switched triac (zero voltage switch)
    Maximum load switching output 10A
    Minimum load dimming output 1 W light bulb
    Power loss at nominal load 15 W
    Power loss standby 2.5 W
    Cooling natural circulating air
    Open circuit voltage < 50 Vrms
    Short circuit protection circuit breaker 13 A max. (characteristic B or C)
    Overload protection reducing in case of overtemperature (status LED flashes)
    Switch-on delay approx. 400 ms (mains switch-on)
    Operating and error indication 3 LEDs (Power, Run, Status)

    Design, Dimensions, Weight

    Design Sheet steel with aluminium cooler, mounting on DIN rail 35 mm
    Dimensions WxHxD 105x90x49mm
    (Observe a minimum distance of 10mm to the next dimmer. At full load we recommend a distance of 30mm.)
    Weight 460 g

    Ordering Data and Conformity

    Type designation MDK-ES-10
    Article no. SE215.00.000
    Make varintens
    Conformity CE

    Instructions Manuals / Data Sheet

    Additional Equipment

    • VIP90/2 L - dimmable ECG for dimming fluorescent lamps