varintens Universal Dimmer UDK-04-10 (0-10V)

The 4-way Universal Dimmer is suitable for all common dimmable types of light sources. 4 separate dimmer inputs and outputs are available. The control circuits automatically recognize the connected load and switch accordingly automatically from trailing edge to leading edge technology.

Quick Facts

  • universal dimmer
  • 4x 570W/VA 2.5A
  • control: 0-10V, 1-10V
  • integrated test function

The UDK-04-10 (0-10V) is a robust dimmer in leading edge and trailing edge technology. On the one hand it can be controlled by different types and on the other hand it can also control different loads:

  • control via a potentiometer on the internal voltage source, with an external voltage source or also with a sink current source
  • control of light bulbs and high-voltage halogen bulbs as well as low-voltage halogen lamps with electronic transformer
  • also suitable for many types of LED retrofits

An automatic or manual switch-off function extends the application range. The UDK has 4 regulated (dimmable) outputs 230V/2.5A each with an integrated switch-on / switch-off function. 

    Electrical Data

    Per channel  
    Mains voltage 230 V ±10%
    Mains frequency 50 Hz (option 60 Hz)
    Technology dimming output trailing edge / leading edge with transistors
    Maximum load dimming output 2.5 A (570 VA/W)
    Minimum load dimming output 1 W light bulb
    Power loss at nominal load 4.7 W
    Power loss standby 0.4 W
    Cooling natural circulating air
    Open circuit voltage < 35 Vrms
    Short-circuit protection electronic rapid shutdown
    Overload protection temperature monitoring (response value 85°C)
    Switch-on delay approx. 2 s (mains switch-on)
    Button on module ON / brighter / darker (for test purposes)
    Operating and fault indication 6 LEDs (Power, Run, 4 x Status)

    Design, Dimensions, Weight

    Design Sheet steel with aluminium cooler, mounting on DIN rail 35 mm
    Dimensions WxHxD 234x90x59mm
    (Observe minimum distance to the next dimmer of 10mm. At full load we recommend a distance of 30mm.)
    Weight 850 g

    Ordering Data and Conformity

    Type designation UDK-04-10 (0-10V)
    Article no. SE215.30.010
    Make varintens
    Conformity CE

    Instructions Manuals / Data Sheet

    Additional Equipment

    • DGL-01U - Dynamic base load for LED lamps