Skip to main content Skip to page footer

varintens Universal Dimmer UDK-04-10 (RS-485)

The 4-way Universal Dimmer is suitable for all common dimmable types of light sources. 4 separate dimmer inputs and outputs are available. The control circuits automatically recognize the connected load and switch accordingly automatically from trailing edge to leading edge technology.

Quick Facts

  1. universal dimmer
  2. 4x 570W/VA 2.5A
  3. DMX interface
  4. Adaptolux / ISYGLT BUS
  5. integrated test function
  6. from Switzerland

The UDK-04-10 (RS-485) is a robust dimmer in leading edge and trailing edge technology. On the one hand it can be controlled by different types and on the other hand it can also control different loads:

  • control via DMX BUS, adaptolux BUS and RS-485 standard systems
  • control of light bulbs and high-voltage halogen bulbs as well as low-voltage halogen lamps with electronic transformer
  • also suitable for many types of LED retrofits

An automatic or manual switch-off function extends the application range. The UDK has 4 regulated (dimmable) outputs 230V/2.5A each with an integrated switch-on / switch-off function. 

Design, Dimensions, Weight

Design Sheet steel with aluminium cooler, mounting on DIN rail 35 mm
Dimensions WxHxD 216.5x90x59mm
(Observe minimum distance to the next dimmer of 10mm. At full load we recommend a distance of 30mm.)
Weight 775 g

Ordering Data and Conformity

Type designation UDK-04-10 (RS-485)
Article no. SE215.30.020
Make varintens
Conformity CE

Electrical Data

Per channel  
Mains voltage 230 V ±10%
Mains frequency 50 Hz (option 60 Hz)
Technology dimming output trailing edge / leading edge with transistors
Maximum load dimming output 2.5 A (570 VA/W)
Minimum load dimming output 1 W light bulb
Power loss at nominal load 4.7 W
Power loss standby 0.4 W
Cooling natural circulating air
Open circuit voltage < 35 Vrms
Short-circuit protection electronic rapid shutdown
Overload protection temperature monitoring (response value 85°C)
Switch-on delay approx. 2 s (mains switch-on)
Button on module ON / brighter / darker (for test purposes)
Operating and error indication 6 LEDs (Power, Run, 4 x Status)

Additional Equipment

  • DGL-01U - Dynamic base load for LED lamps

To top